PI Manufacturing 6917, Инструкция по установке и эксплуатации

Страница: 24 / 64

Step 9. To set P2P (point to point) mode
Choose the item- Basic Setting
，
to select “
Mode
”
→
”
AP Bridge-Point to Point
” .
After you d o , you will see the following screen.
To select “ AP Bridge-Point to Point ”
To select “Channel 11”
Key in another’s ‘AP MAC address
Step 10. Please key-in the number of Base station unit (BU) to the column of AP MAC Address.
If you don’t know the values, please look for the 3.2 (set the BU), to run step 8, then to
search the number.
Step 11. To choose 802.11g of Mode column.
Step 12 To change the values of channel to 11.
23