phytron phyMOTION POWM01.2, Руководство пользователя

Страница: 18 / 37

Manual POWM01 / POWM02 / POWM03 / POWM04
MA 1273-A007 EN
18
5.5 Features POWM02 and POWM04
If the total current of all modules in a voltage group (20 A) is exceeded, or if a voltage
group has various voltages to begin with, the POWM02 and POWM04 module must be
applied for the supply of the power stages and I/Os.
A power module can be inserted only in designated slots. These slots must be already
defined before ordering the
phy MOTION
TM
.
Features
Power supply POWM02 EXT
24…70 V
DC
/ max.20 A (motor supply U
B
)
+24 V
DC
(
±20%)
electrically isolated / max. 5 A (I/O supply)
POWM04 INT
48 / 70 V
DC
/ max.20 A (motor supply U
B
)
+24 V
DC
(
±20%)
electrically isolated / max. 5 A (I/O supply)
+24 V
DC
output voltage i.e. for sensors
Voltage range
POWM02
between 24…70 V
DC
and 24 V
DC
I/O
POWM04
between 48 / 70 V
DC
and 24 V
DC
I/O
Current capacity max. 20 A / U
B
, max. 5 A / +24 V
DC
The total current at + 24V
DC
for all inputs / outputs, as well as
limit and reference switches, encoders and sensors incl. the
24 V
DC
tap of POWM03 / 04 modules must not exceed the
value of 5 A per total phy MOTION
TM
.
Power loss
POWM02 / POWM04
1400 mW at U
B
= 70 V
Over voltage protection no
Short circuit protection Logic voltage (5 V): auto-reset 2.6 A
U
B
: 2 x 10 A
Diagnostics 2 status LEDs on the front panel