phytron phyMOTION POWM01.2, Руководство пользователя

Страница: 20 / 37

Manual POWM01 / POWM02 / POWM03 / POWM04
MA 1273-A007 EN
20
4.5 Functions
POWM01 and POWM02:
Feed-in to the power supply:
•
24 to 70 V
DC
supply voltage (for motors and generates internally the logic
voltages) – 20 A max.
•
Optional electrically isolated 24 V
DC
for inputs/outputs, limit and reference switches
POWM03 and POWM04:
Feed-in to the power supply:
•
48 and 70 V
DC
supply voltage (for motors and generates internally the logic
voltages) – 20 A max.
•
Optional electrically isolated 24 V
DC
for inputs/outputs, limit and reference switches
•
+24 V
DC
output voltages i.e. for sensors
The total current at + 24V
DC
for all inputs / outputs, as well as limit and reference
switches, encoders and sensors incl. the 24 V
DC
tap of POWM03 / 04 modules must
not exceed the value of 5 A per total phy MOTION
TM
..
Only POWM01 and POWM03:
Configuration:
•
USB interface for programming and diagnostics
•
Device address switch for setting a fixed bus address
(is necessary e.g. with RS 485, CAN etc.)
•
Remote/Local switch for switching the mode from Remote (controller receives the
commands via HOST interface) to Local (the controller is running in pure
stand-alone mode with a sequential program).
•
Reset button for the resetting of the controller
•
Connection of an external phytron t ouch panel (e.g. Android-based tablet)