Phytotronics WATER PRO, Руководство пользователя

Страница: 13 / 18

13
23. Push the PRIOR/NEXT switch to NEXT to go to the next question.
24. Choose the length of time the station will activate (water/mist the plants when
the target is reached). Use the
VALUE switch to enter this choice.
25. Push the PRIOR/NEXT switch to NEXT to go to the next question.
26. If this is an irrigation station , pulse irrigation may be used by choosing the
number of times to repeat the watering. Use the VALUE switch to enter this
choice.
27. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
28. If using pulse irrigation by repeat watering, now decide how much time
should elapse between pulses. Use the VALUE switch to enter this choice.
29. Push the PRIOR/NEXT switch to NEXT to go to the next question.
30. To change the name, answer YES. Use the VALUE switch to enter this choice.
31. Designate the new name of this station. Use the VALUE and PRIOR/NEXT
switches to enter the name.
32. Push the
PRIOR/NEXT switch to go to the next station setup.
33. If choosing an AGING program , the day of the Crop Age Program the station
is to be on can be entered here. Return to this selection after an AGING
program is set up for use with this station.
34. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
35. Choose whether to Hold The Last Day (which means let the station water after
the AGING program has finished, exactly as it watered on the last day of the of
the AGING program) or to Stop Watering. Use the
VALUE switch to enter this
choice.
36. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
37. Choose whether or not to use a DISABLE program. Use the VALUE switch to
enter this choice. Remember that a misting station recognizes a disable time
relative to sunrise and an irrigation station recognizes a disable time relative to
sunset. Both misting and irrigation stations reactivate from disables at sunrise.
38. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
39. Choose the VPD Sensor to attach to this station or choose Manual VPD to run
the station as a time clock.
40. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
41. If choosing Manual VPD in order to run this station using time, enter in the
VPD number. The number entered is accumulated once a minute. For example,
if 100 were entered and the Fixed Target was 60000, it would take 10 hours to
reach the target. An accumulation of 100 per minute, 6000 per hour. Use the
VALUE and the PRIOR/NEXT switches to enter this target. Manual VPD
range is 1 to 999.
42. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
43. Choose the length of time the station will activate (water/mist the plants when
the target is reached). Use the
VALUE switch to enter this choice.
44. Push the PRIOR/NEXT switch to NEXT to go to the next question.
45. If this is an irrigation station , pulse irrigation may be used by choosing the
number of times to repeat the watering. Use the VALUE switch to enter this
choice.
46. Push the
PRIOR/NEXT switch to NEXT to go to the next question.