Phytec phyCORE-TC1796, Руководство по оборудованию

Страница: 7 / 65

Preface
Preface
This phyCORE-TC1796 Hardware Manual describes the board's
design and functions. Precise specifications for Infineon’s TC1796
TriCore microcontroller series controller can be found in the enclosed
microcontroller Data Sheet/User's Manual. If software is included
please also refer to additional documentation for this software.
In this hardware manual and in the attached schematics, low active
signals are denoted by a "/" in front of the signal name (i.e.: /RD). A
"0" indicates a logic-zero or low-level signal, while a "1" represents a
logic-one or high-level signal.
Declaration of Electro Magnetic Conformance of the
PHYTEC phyCORE-TC1796
PHYTEC Single Board Computers (henceforth products) are designed
for installation in electrical appliances or as dedicated Evaluation
Boards (i.e.: for use as a test and prototype platform for
hardware/software development) in laboratory environments.
Caution:
PHYTEC products lacking protective enclosures are subject to
damage by ESD and, hence, may only be unpacked, handled or
operated in environments in which sufficient precautionary measures
have been taken in respect to ESD-dangers. It is also necessary that
only appropriately trained personnel (such as electricians, technicians
and engineers) handle and/or operate these products. Moreover,
PHYTEC products should not be operated without protection circuitry
if connections to the product's pin header rows are longer than 3 m.
©
PHYTEC Meßtechnik GmbH 2009 L-719e_2
1