Phytec phyCORE-TC1796, Руководство по оборудованию

Страница: 11 / 65

Introduction
©
PHYTEC Meßtechnik GmbH 2009 L-719e_2
5
The phyCORE-TC1796 offers the following features:
•
subminiature SBC in phyCORE dimensions 71,5 x 57 mm with
two 160-pin high-density (0.635 mm) Molex connectors, enabling
it to be plugged like a “big chip” into target application
•
Processor: Infineon Tricore TC1796, 20 MHz external clock
•
Internal Components of the phyCORE-TC1796:
- High performance 32-bit TriCORE CPU
- 2MByte Program Flash Memory
- DMA Controller
- two synchronous serial interfaces
- two UARTs
- MultiCAN 2.0B (4 Nodes) (one CAN node supports TTCAN)
- Capture and Compare units
- Two General Purpose Timer Unit (GPTU) timers with
additional Local Timer Cell Array (LTCA2)
- Two 16-channel Analog-to-Digital Converter units (ADC) with
selectable 8-bit, 10-bit, or 12-bit resolution
- One 4-channel Fast Analog-to-Digital Converter unit (FADC)
- 44 analog input lines for ADC and FADC
- Multi-purpose I/O signals
•
Memory Configuration
1
:
- SRAM (2 Banks): 8MByte maximum
- Flash-ROM: 64 MByte Intel Strata Flash maximum;
- SPI memory: 32Kbyte EEPROM or 2MByte Flash
•
two I
2
C – Bus Master –Controller (SC18IS600)
•
I
2
C Real-Time Clock with calendar and alarm functions
•
Ethernet-Controller mit HW TCP/IP-Stack (W5300) 10/100Mbit
(PHY)
•
Optional USB to UART Bridge
•
UART: RS-232 transceiver for two channels
(RxD/TxD); TTL level can be configured
•
MultiCAN port: SN65HVD23x transceiver for all
channels; TTL level can be configured
•
JTAG/Debug port
1
: Please contact PHYTEC for more information about additional modul configurations.