manualshive.com logo in svg

Phytec phyCORE-PXA270, Руководство по оборудованию

Поделиться
Скачать
Phytec phyCORE-PXA270 Скачать руководство пользователя страница 2

Carrier Board phyCORE-PXA270 

 

 

 

 

   

©

 

 PHYTEC Messtechnik GmbH 2006     L-668e_1 

 

In this manual are descriptions for copyrighted products that are not explicitly 
indicated as such. The absence of the trademark (

™

) and copyright (

©

) symbols 

does not imply that a product is not protected. Additionally, registered patents and 
trademarks are similarly not expressly indicated in this manual. 
 
The information in this document has been carefully checked and is believed to be 
entirely reliable. However, PHYTEC Messtechnik GmbH assumes no 
responsibility for any inaccuracies. PHYTEC Messtechnik GmbH neither gives 
any guarantee nor accepts any liability whatsoever for consequential damages 
resulting from the use of this manual or its associated product. PHYTEC 
Messtechnik GmbH reserves the right to alter the information contained herein 
without prior notification and accepts no responsibility for any damages which 
might result. 
 
Additionally, PHYTEC Messtechnik GmbH offers no guarantee nor accepts any 
liability for damages arising from the improper usage or improper installation of 
the hardware or software. PHYTEC Messtechnik GmbH further reserves the right 
to alter the layout and/or design of the hardware without prior notification and 
accepts no liability for doing so. 
 

©

 Copyright 2006 PHYTEC Messtechnik GmbH, D-55129 Mainz. 

Rights - including those of translation, reprint, broadcast, photomechanical or 
similar reproduction and storage or processing in computer systems, in whole or 
in part - are reserved. No reproduction may occur without the express written 
consent from PHYTEC Messtechnik GmbH. 
 

 EUROPE 

NORTH 

AMERICA 

Address: 

PHYTEC Technologie Holding AG 
Robert-Koch-Str. 39 
D-55129 Mainz 
GERMANY 

PHYTEC America LLC 
203 Parfitt Way SW, Suite G100 
Bainbridge Island, WA 98110 
USA 

Ordering 
Information: 

+49 (800) 0749832 

[email protected]

1 (800) 278-9913 

[email protected]

Technical 
Support: 

+49 (6131) 9221-31 

[email protected]

1 (800) 278-9913 

[email protected]

Fax: 

+49 (6131) 9221-33 

1 (206) 780-9135 

Web Site: 

http://www.phytec.de

http://www.phytec.com

 
1

st

 Edition February 2006

Содержание phyCORE-PXA270



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды