Phytec L-1017e.A3 i.MX 8M Plus, Руководство пользователя

Страница: 8 / 82

L-1017e.A3 i.MX 8M Plus BSP Manual
•
•
•
•
•
It is also possible to pass this information directly using command line parameters:
host$ DISTRO=ampliphy-vendor-xwayland MACHINE=phyboard-pollux-imx8mp- 3 ./phyLinux
init -p imx8mp -r PD-BSP-Yocto-NXP-i.MX8MP-PD22. 1.0
After the execution of the init command, phyLinux will print a few important notes as well as information for the
next steps in the build process.
Starting the Build Process
Set up the shell environment variables:
host$ source sources/poky/oe-init-build-env
The current working directory of the shell should change to build/ .
Open the main configuration file and accept the GPU and VPU binary license agreements. You have to
uncomment the corresponding line.
host$ vim conf/local.conf
# Uncomment to accept NXP EULA
# EULA can be found under ../sources/meta-freescale/EULA
ACCEPT_FSL_EULA =
"1"
Build your image:
host$ bitbake phytec-headless-image
BSP Images
All images generated by Bitbake are deployed to ~/yocto_imx8mp/build/deploy/images/<machine>. The following
list shows for example all files generated for the i.MX 8M Plus phyboard-pollux-imx8mp-* machine:
If you cannot identify your board with the information given in the selector, have a look at the invoice for
the product. And have look at
https://www.phytec.de/bsp-download/?bsp=BSP-Yocto-NXP-i.MX8MP-
PD22.1.0
Note
This needs to be done every time you open a new shell for starting builds.

Note
We suggest starting with our smaller non-graphical image phytec-headless-image to see if everything is
working correctly. The first compile process takes about 40 minutes on a modern Intel Core i7. All
subsequent builds will use the filled caches and should take about 3 minutes.
