Phytec L-1017e.A3 i.MX 8M Plus, Руководство пользователя

Страница: 68 / 82

L-1017e.A3 i.MX 8M Plus BSP Manual
Connectors:
id encoder status name size (mm) modes encoders
35 34 connected LVDS- 1 216x135 1 34
modes:
index name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot
#
0 1280x800 59.07 1280 1380 1399 1440 800 804 808 823 70000 flags: phsync, pvsync;
type: preferred, driver
props:
1 EDID:
flags: immutable blob
blobs:
value:
2 DPMS:
flags: enum
enums: On= 0 Standby= 1 Suspend= 2 Off= 3
value: 0
5 link-status:
flags: enum
enums: Good= 0 Bad= 1
value: 0
6 non-desktop:
flags: immutable range
values:
0 1
value: 0
4 TILE:
flags: immutable blob
blobs:
value:
Display
The phyBOARD-Pollux supports up to 4 different display outputs. Three can be used simultaneously. The following
table shows the required extensions and devicetree overlays for the different interfaces.
Interface Expansion devicetree overlay
HDMI phyBOARD-Pollux no overlay
LVDS0 PEB-AV-10
imx8mp-phyboard-pollux-peb-av-010.dtbo
LVDS1 phyBOARD-Pollux disabled if PEB-AV-10 overlay is used
MIPI PEB-AV-12 (MIPI to LVDS)
imx8mp-phyboard-pollux-peb-av-012.dtbo