Phytec L-1017e.A3 i.MX 8M Plus, Руководство пользователя

Страница: 6 / 82

L-1017e.A3 i.MX 8M Plus BSP Manual
•
•
•
•
host$ sudo dd if =<IMAGENAME>-<MACHINE>.sdcard of=/dev/<your_device> bs=1M conv=fsync
status=progress
Using the device name ( <your_device> ) without appended number (e.g. sde ) which stands for the whole device. The
parameter conv=fsync forces a sync operation on the device before dd returns. This ensures that all blocks are
written to the SD card and are not still in memory. The parameter status=progress will print out information on how
much data is and still has to be copied until it is finished.
<BUILD-TIME> has the format: YYYYMMDDHHMMSS
example:
Date =
14.01 . 2022
Time = 10 : 42 : 11
<BUILD-TIME> = 20220114104211
First Start-up
To boot from an SD card, the bootmode switch (S3) needs to be set to the following position:
3 SD Card Bootmode
Insert the SD card
Connect the target and the host with micro USB on X1 debug USB
Power up the board
Note
The created file phytec-qt5demo-image-phyboard-pollux-imx8mp-3.sdcard is only a link to a file like phytec-
qt5demo-image-phyboard-pollux-imx8mp-3-<BUILD-TIME>.rootfs.sdcard.
