Physipro XL 5 страница 89 Скачать руководство пользователя

Страница: 89 / 104

Owner’s Manual

ENGLISH

POSITIONING THE OCCUPANT

WARNINGS:

Securing wheelchair accessories:

•

To reduce the risk of injury to passengers, remove lap trays that have not

been specifically designed for transport safety and secure separately inside

the vehicle or affix lap tray securely to the wheelchair, as far away as

possible from the occupant, with a shock-absorbing material placed in

between the lap tray and the occupant.

•

All auxiliary equipment must be firmly secured to the wheelchair or removed

and stowed in a secure location during transport to reduce the risk of injury.

•

If auxiliary equipment cannot be removed (such as with respirators and IV

supports), the equipment must be placed as far away as possible from the

occupant and wrapped in a shock-absorbing material. Make sure the

protective packaging material conforms to the FMVSS201 requirements.

Adjusting the wheelchair:

•

During transportation, ensure the back angle is adjusted at no more than 30

degrees to the vertical to reduce the risk of injury to the occupant.

•

If wheelchair is equipped with angle-adjustable seating, the seat angle must

be set at 10-degrees.

Neck

and head

protection:

•

Make sure the occupant is properly positioned in the wheelchair to protect

their neck

and their head

in the event of a collision.

•

The use of a headrest is recommended onboard

adapted transport to reduce

the risk of neck

and head

injur

ies

in the event of a collision.

vision 0

July

202

Содержание XL 5









































































































Результаты поиска

Содержание XL 5

Отзывы:

Похожие инструкции для XL 5

Бренды по названию

Популярные бренды

Physipro XL 5, Руководство пользователя

Результаты поиска

Содержание XL 5

Отзывы:

Похожие инструкции для XL 5

Бренды по названию

Популярные бренды