Physipro XL 5 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 104

Physipro XL 5 Скачать руководство пользователя страница 52

XL5 and XL RF

ENGLISH

52

Modifying the standard backrest angle

The angle of the backrest can be adjusted
to accommodate the needs of the
occupant.

1. With a 4mm Allen key and a 10mm wrench,

remove bolts

B

.

2. Once the bolts are removed, reposition the

back post at the desired angle.

3. Reinsert bolts

B

in the adjustment holes

corresponding to the desired angle and
tighten firmly.

Note

-

The interval between two consecutive adjustment holes is 5⁰. For a 120⁰

backrest angle, use the 115⁰ position in combination with the upper 120⁰
adjustment hole. The 120⁰ backrest angle is achievable with standard back post
only.

Installing the dynamic backrest

The Standard backrest can be replaced by a Dynamic backrest to better
accommodate the occupants needs, by following these steps.

1. Remove armrests and propulsion wheels.
2. Remove backrest, tension bar and stroller bar, if

applicable.

3. With a 10mm wrench, remove screw

A

and lock

washer and pull out the upper back post.

4. With a 4mm Allen key and a 10mm wrench,

unfasten bolts

B

and remove the lower back

post.

5. With a 4mm Allen key and a 10mm wrench,

unfasten bolts

C

to remove the positioning

plates.

Note -

If positioning plates cannot be

dislodged  easily,  remove  the  alignment
sleeves,  located  in  the seat rail, with a flat
punch, this will facilitate  the removal of the
positioning plates. Reinsert  the  alignment
sleeves  in  the  seat  rail  before  installing
dynamic positioning plates.

«
...
50
51
52
53
54
...
»

Содержание XL 5









































































































Отзывы:

Нет отзывов