Physiomed PHYSIOSON-Expert, Руководство по эксплуатации

Страница: 9 / 34

Controls and Indicators
2 Controls and Indicators
Due to the subdivision of its comfort LCD,
PHYSIOSON-Expert
allows for easy opera-
tion despite of its vast range of functions.
The plastic housing and the front panel protect the electronic components and sim-
plify cleaning.
Safety-related components are continuously monitored by the microprocessor, erro-
neously initiated operating steps are suppressed, a self-test routine is performed af-
ter switch-on and, in case of a malfunction, the transducers are automatically cut
off.
2.1 Function of Controls and Indicators
In the following section we will introduce the individual controls and indicators of
PHYSIOSON-Expert
. The numbers in angle brackets refer to the
Instrument Overview
at the beginning of this manual.
2.1.1 Mains Module <1>
The mains module <1> with mains supply, fuses and mains switch
is situated at the rear side of the apparatus.
For mains supply do only use the mains cable provided by the
manufacturer.
PHYSIOSON-Expert
is switched on and off by using the integrated
mains switch. After switching on, a self-test and the calibration of
the transducers are automatically carried out by the instrument (cf.
Notes on Operation on page 8).
Setting the line voltage
After replacing the fuses you can run the apparatus with 230 V as well as 115 V
simply by using the rotatable fuse carrier at the
mains module <1> . Fuses are situ-
ated under the cover of the mains module <1> in a fuse carrier. (Refer to section
Technical Data
on page 24 for safety data. )
Replace 500 mA fuses with 1 A fuses, turn the fuse carrier by 180° and insert it
again, so that the “red window” of the
mains module <1> reads “115 V”, after
the cover has been closed again.
Warning
Set the line voltage at the mains module to match the incoming line
voltage.
PHYSIOSON-Expert
3