Phybridge NVT PoLRE Series, Руководство пользователя

Страница: 42 / 52

38
6 . C O M M A N D L I N E I N T E R F A C E
C o m m a n d R e f e r e n c e
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
Command Purpose Usage Usage Notes
pal-
service-log
Configure,
enable or
disable LOG
service on the
switch.
pal-service-log {start|stop|restart}
pal-service-log remote-syslog-show
pal-service-log remote-syslog-ip <IP>
pal-service-log remote-syslog-port <PORT>
<IP>
is a single-
value entry of the
IP address of the
target syslog
server.
<PORT>
is a
single-value entry
of the syslog port
number on the
remote syslog
server. The default
is port 514.
NOTE
If you change the
syslog remote IP,
you are required
to restart the log
service.
pal-
service-ntp
Enable or
disable NTP
service on the
switch.
pal-service-ntp {start|stop|restart|enable|disable}
pal-
service-
snmp
Enable or
disable SNMP
service on the
switch.
pal-service-snmp {start|stop|restart|enable|disable}
pal-service-snmp receiver {enable|disable|show}
pal-service-snmp receiver-ip <ADDRESS>
pal-
service-stp
Enable or
disable STP
service on the
switch.
pal-service-stp {GbE1|GbE2} {enable|disable}
pal-service-stp service {start|stop|enable|disable}
pal-service-stp proto {stp|rstp}
pal-service-stp port-priority <VALUE>
pal-service-stp showbridge
pal-service-stp showcfg {all|bridge-
priority|protocol|age|forward-delay|GbE1-cost|GbE2-
cost}
pal-service-stp age <6-40>
pal-service-stp forward-delay <4-30>
pal-service-stp port-cost {GbE1|GbE2} <0-65536>
<VALUE>
is a
single-value entry
of the priority you
wish to assign.
This value ranges
from 0-61440 and
can be
incremented by
4096. The default
is 32768.