Phybridge NVT PoLRE Series, Руководство пользователя

Страница: 35 / 52

5 . A D M I N P A G E
A d m i n > S e r v i c e s
31
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
Network Time Protocol
Use to configure multiple NTP servers.
1. To add a server, enter the IP address and click ADD .
2. To remove a server, select a server from the list and click REMOVE .
Spanning Tree Protocol
Use to change the spanning tree protocol. The switch supports classic STP and RSTP (rapid spanning tree
protocol); the default is RSTP.
1. To change the protocol, click the Switch Protocol button.
The button name changes based on the currently selected protocol. For example, if the current
protocol is RSTP, the option "Switch Protocol from RSTP to STP" will be shown.
2. To change the bridge priority, use the up and down arrows to increase/decrease the priority in
increments of 4096, then click APPLY .
CAUTION
Enabling STP in a live network will cause service disruptions to end users while the network is converging.
To avoid impacting users, enabling of STP should be conducted outside of core hours or during a
scheduled maintenance period. Consult the MCD Resiliency Guidelines for information on how to
optimally configure STP/RSTP.