Phybridge NVT PoLRE Series, Руководство пользователя

Страница: 34 / 52

30
5 . A D M I N P A G E
A d m i n > S e r v i c e s
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
Services
Use to control all the services for the switch including TELNET, HTTP, LOG, LLDP, NTP, STP and SNMP.
Enable Click to enable/disable a service. This determines whether the service is enabled or disabled on
system startup. The Log service is always enabled.
IMPORTANT
If you disable the HTTP service, the Simple Network Manager will not function after a reboot. If
you stop the HTTP service, you will instantly lose connectivity to the Simple Network Manager.
Run Click to start or stop a service. Note that the start or shutdown of services is not instantaneous
and may take up to one minute.
Remote Log Server
Use to set up a remote log server. Changes are applied immediately.
1. Enter the IP address of the remote log server and click APPLY .
2. (Optional) Change the port number and click APPLY . The default port number is 514.