Body dimension: Transmitter L 92.5 * W 47.8 * H 45.5 mm; Receiver L 93.3 * W 46.7 * H 45.4
mm
Antenna
：
Built-in PCB antenna
Operating temperature: 0
℃
～
+50
℃
Operating humidity: 35
﹪～
95
﹪
RH
FCC Compliance Information
For Transmitter
Company:
Phottix (HK) Ltd.
Name:
Phottix Strato TTL Flash Trigger Transmitter
Model Number:
Strato TTL Transmitter
FCC ID
: P9M-STRATOTTL
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
