background image

 

 
Battery Level Indicator 
EV Adjustment Level 
Channel 
HSS, SCS, Standard Mode 
Key Lock Mode 

 

 
Tip: Turn off all devices – flashes/strobes, cameras, and Phottix Strato TTL transmitters and 
receivers - when connecting and disconnecting devices. 
 
 

Compatibility 

 
The Strato TTL Transmitter is compatible with other Phottix triggers in the following manner: 
  
1. The Strato TTL Transmitter will trigger Strato and Strato II Receivers and Atlas II 
Transceivers (in RX mode) set to the same channel.   
2. The Strato TTL Transmitter will trigger Strato II receivers set to any group. All Strato II 
Receiver groups will fire if set to the same channel as the Strato TTL transmitter.     
3. The Strato TTL Transmitter will not trigger Phottix Odin or Ares.   
4. Phottix Odin TCU or Atlas II (in Tx mode) or Ares Transmitter will not trigger Strato TTL 
Receivers. 

 

5. Using the Strato TTL Transmitter in HSS mode may cause issues with flash sync when 
using Strato and Strato II Multi receivers or Atlas II Transceivers (in RX mode). 
 

 

Inserting batteries 

1.  Press the battery cover in while pushing it away from the Strato TTL transmitter or 

receiver. The battery cover will snap open and slide away from the device. 

2.  Remove the battery cover from the Strato TTL. 
3.  Insert AA batteries. 
4.  Replace the battery cover and push back into the locked position. 

 

Battery Level Indicator 

When the battery voltage is higher than 2.4V, the battery level indicator icon will display four 

bars. 

  As power in the batteries is depleted the bars displayed in the battery level 

indicator icon will disappear. When the batteries are exhausted the battery level indicator will 

display an empty with battery icon. 

 

 

LCD Backlight on the transmitter 

Pressing any button on the transmitter will illuminate the LCD Backlight for approximately 10 
seconds. If no buttons on the transmitter are pressed, the backlight will go off. 
 

Содержание Strato TTL











Отзывы: