background image

 

Compatibility with Phottix Flashes/Strobes/Flash Triggers 

 

 

Note: 

1

 

Set the master unit and slave units to the same channel and corresponding           

groups. 

2

 

Strato receiver comes without group selection. It can be triggered by any  

group of Odin II transmitter at the same channel.   

3

 

When using Odin II transmitter with Strato/ Strato II Multi receiver, the flash 

attached to the receiver has to be set to Manual mode.   

4

 

When using Odin II transmitter with Strato/ Strato II Multi receiver in HSS 

mode, the flash may not be able to sync. 

5

 

Strato and Strato II Multi transmitter cannot trigger a Odin II receiver.   

 

V

C.Fn: Setting the Custom Function 

Odin II transmitter comes with a number of programmable custom functions. To edit 
those functions, see below: 

1. Press 

  to display the custom function screen. 

Master Unit 

Slave Units 

Support 

TTL&M Info 

Transmission? 

Phottix Odin TTL Receiver for Canon 

YES 

Phottix Strato    Receiver for Canon 

NO 

Phottix Strato II Multi Receiver for 
Canon 

NO 

Phottix Transceiver Flash for 
Canon ODIN RX Mode 

YES 

Phottix Indra PPL500 Studio Light 
Odin-C Mode 

YES 

Phottix Indra 360 TTL Studio Light 
Odin-C Mode 

YES 

Phottix Indra PPL500 Studio Light 
Strato II Mode 

NO 

Odin II Transmitter 

Phottix Indra 360 TTL Studio Light 
Strato II Mode 

NO 

Phottix Odin TTL 
Transmitter for Canon 

Odin II Receiver 

YES 

Phottix    
Transceiver Flash for 
Canon  ODIN TX 
Mode

 

Odin II  Receiver 

YES

 

Содержание odin II TTL
















Отзывы: