Phottix odin II TTL, Инструкция по эксплуатации

Страница: 11 / 15

1. Press button to enable HSS. Icon will be displayed on the LCD screen.
2. Press button again to disable the HSS function and switch to first curtain
sync.
High Speed Continuous Shooting
Using the Phottix Odin II will result in slower continuous high speed shooting than
can be achieved when using a flash directly on the camera. There are differences in
metering between the Phottix Odin system related to groups and the pre-flashes than
Canon’s native system.
Note:
1. High speed continuous shooting function cannot be set on the Odin II transmitter.
2. High speed continuous shooting function needs to e set on camera. Refer to your
camera manual for specific menu settings.
AF Assist Light
In low light/contrast situation, you can enable the AF assist light on transmitter by
setting custom function. The transmitter’s built-in Auto Focus Assist Light will
illuminate to assist with AF. The AF Assist Light on the front of the transmitter will
project a focusing target on the subject. As laser light, the AF assist light is featured
less decay, good directionality and assist performance.
Note: The laser AF assist light is safe with optical power less than 5mW. Please avoid
pointing the light at human eyes.
ODS Functions
When shooting with a strobe light (IGBT controlled light in particular) in HSS mode,
adjusting the ODS value properly will in some way help with a high speed sync issue.
You can set the ODS value in the custom function.
The ODS function’s performance varies with camera models, working modes of
strobes and the flash duration times. What works with one brand and model and
studio light may not work with another.
Note:
1. Please only use the ODS function for irregular situation. Set it to default when not
using the function.
2. When the shooting conditions are changed, please reset the ODS value.
Shortcut Keys
To enable IDLE mode: Press and hold and simultaneously for approx. 2s.