Phottix odin II TTL, Инструкция по эксплуатации

Страница: 2 / 15

operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The product is classified as Class 3R laser product,
according to the following standards IEC/EN
60825-1 "Radiation Safety of Laser Products."
Class 3R: A Class 3R laser is considered safe if
handled carefully, with restricted beam viewing.
With a class 3R laser, the MPE can be exceeded, but
with a low risk of injury. Visible continuous lasers in
Class 3R are limited to 5mW. For other wavelengths
and for pulsed lasers, other limits apply.
Table of Content
I. Parts
II. Preparation Before Use
III. LCD Display
IV. Functions and Operations
V. Custom Function Settings