Phottix Laso, Инструкция по эксплуатации

Страница: 28 / 172

28
When the flash that is set to wireless
slave mode is ready, the AF-assist beam
emitter blinks at 1-second intervals;
Check that the < > slave flash-ready
icon is lit on the master unit’s LCD
panel;
When the recycling of all the flash units
is completed, the master units’ charge
lamp lights on.
1.6 Check the operation: Press the master
unit’s test flash button (charge lamp). The
slave unit flash will fire. If not, check that it
is placed within range.
1.7 Take the picture: Set the camera and
take the picture, in the same way as with
normal flash shooting. If a standard flash
exposure was obtained, the flash exposure
confirmation lamp lights up (blue) for 2
sec.
2. Autoflash Shooting Using Multiple Slave
Unit
When you need more flash output you can
increase the number of slave units and fire
them as a single flash. To add slave units, use
the same procedure as “ Autoflash Shooting
Using One Slave Unit”. Set A, B or C as the
firing group. The flash will not fire if it is set to
D or E. When the number of the slave units is
increased, automatic control is performed to
fire all flashes at the same flash output and
ensure that the total flash output results in
standard exposure.