Phottix Laso, Инструкция по эксплуатации, Страница: 14 / 172

14
a slave unit. For operations, see the flash’s
instruction manual.
Note: When two or more units are set to master,
the unit with the < > lamp lit in green is
the one that fires.
Modeling Flash
1. Modeling Flash from a Master Unit
When the camera’s depth-of-view
preview button is pressed, the flash will
fire continuously for 1 sec. This is called
the modeling flash. It enables you to see
the effects of the flash on the subject and
the lighting balance. You can also fire the
modeling flash by pressing the charge lamp/
test flash button on Phottix Laso Transmitter
(the operation must be enabled by setting
C.Fn 02).
2. Modeling Flash from a Slave Unit
With EOS digital cameras released since 2012,
you can fire the modeling flash from a flash
set as a slave unit. For the operations, see the
flash’s instruction manual.
AF Assist Light
In low light/contrast situation, the Phottix Laso
Transmitter’s built-in Auto Focus Assist Light
will illuminate to assist with AF. The AF Assist
Light on the front of the Transmitter will project
a focusing target on the subject. As a laser
light, the AF assist light features little decay,
great directionality and performance. You can
choose to enable or disable the AF assist light
by setting P. Fn 08.