Phottix Laso, Инструкция по эксплуатации, Страница: 22 / 172

22
The slave units can be radio-enabled speedlites
and set on slave mode, and also other Canon
ETTL flashes non-radio-enabled by using with
the Phottix Laso Receiver.
Master Unit
Phottix Laso
Transmitter
Canon Speedlites that have a
wireless flash shooting function
using radio transmission, like
600EX-RT (Slave mode).
Phottix Laso RCanon
ETTL Flash (Non-wireless mode)
Slave Unit
Note:
1) When using the Phottix Laso Receiver as
slave unit, restrictions will apply to parts of its
functions and operations. For details, see the
instruction manual of Phottix Laso Receiver
2) When performing radio transmission
wireless flash shooting, restrictions may apply
to the flash mode, maximum flash sync speed
(referred to below as the “flash sync speed”)
and high-speed sync function, depending on
the camera used.
Wireless Settings
To perform wireless shooting, set the Phottix
Laso Transmitter (master unit) and flash (slave
unit) with the following procedure.
1. Master unit setting: Check that
is displayed.
2. Slave unit setting: For the slave unit setting,
see the flash or Receiver’s instruction manual.