Phottix Laso, Инструкция по эксплуатации, Страница: 27 / 172

27
INSTRUCTION MANUAL
En
ETTL: Fully Automatic Wireless
Flash Shooting
The Phottix Laso Transmitter attached to the
camera (master) and a wirelessly controlled
flash (slave) can perform fully automatic
wireless shooting.
1. Autoflash Shooting Using One Slave Unit
1.1 Set the flash as the slave unit: For the
slave unit setting, see the flash or the
Phottix Laso Receiver’s instruction manual.
Set A, B or C as the firing group. If set to D
or E, the flash does not fire.
1.2 Check the channel and ID: If the
channels and IDs of the master unit and
slave unit are different, set them to exactly
the same number.
1.3 Position the camera and the slave
unit within the range of wireless radio
transmission.
1.4 Set the flash mode to <
>: Press
the < > button on master and set
the flash mode to < >.The slave unit
is set automatically to< > during
shooting via the control form the master
unit. For slave units that use Phottix Laso
Receiver, flashes on the Receiver need not
to set to wireless slave mode, but the need
to be set to ETTL mode manually before
shooting.
1.5 Check the transmission status and that
the flash is ready:
Check that the < >lamp lights
green;