Photron FASTCAM ultima SE, Руководство пользователя

Страница: 34 / 92

Recording Operation Recording Operation
RANDOM RANDOM
Press the Mode Sel button as many times as needed to illuminate the LED under Press the Mode Sel button as many times as needed to illuminate the LED under
Random. To begin recording first press the Ready button and then the Record button.
Random. To begin recording first press the Ready button and then the Record button.
The processor will record up to 256 pictures, each time the Record button is pressed,
The processor will record up to 256 pictures, each time the Record button is pressed,
or when a trigger signal is received through the Trigger In or Trigger SW In connec-
or when a trigger signal is received through the Trigger In or Trigger SW In connec-
tors. The number of pictures recorded is set by the DIP switch, SW1, on the rear
tors. The number of pictures recorded is set by the DIP switch, SW1, on the rear
panel of the processor. See page 2.7 of this manual for SW1 settings.
panel of the processor. See page 2.7 of this manual for SW1 settings.
Random mode frame numbering is the same as Start mode. Random mode frame numbering is the same as Start mode.
NOTE NOTE
If you wish to exit Random record mode before memory has been fully If you wish to exit Random record mode before memory has been fully
loaded press the Mode Sel button.
loaded press the Mode Sel button.
3-8 3-8