Photron FASTCAM ultima SE, Руководство пользователя

Страница: 33 / 92

Recording Operation Recording Operation
CENTER CENTER
Press the Mode Sel button as many times as needed to illuminate the LED above Press the Mode Sel button as many times as needed to illuminate the LED above
Center. To begin recording first press the Ready button and then the Record button.
Center. To begin recording first press the Ready button and then the Record button.
The processor will record images until a trigger signal is received, either through
The processor will record images until a trigger signal is received, either through
Trigger In, Trigger SW In or by pressing the Record button.
Trigger In, Trigger SW In or by pressing the Record button.
The Center mode records an equal number of frames before and after the trigger The Center mode records an equal number of frames before and after the trigger
signal input. A trigger signal causes the processor to mark the frame that was being
signal input. A trigger signal causes the processor to mark the frame that was being
recorded at the time the trigger was received as the trigger point. The processor
recorded at the time the trigger was received as the trigger point. The processor
records a number of frames equal to half the number of frames available in memory
records a number of frames equal to half the number of frames available in memory
after the trigger point and then stops recording.
after the trigger point and then stops recording.
CENTER MODE FRAME NUMBERING CENTER MODE FRAME NUMBERING
NOTE: NOTE:
Allow Sufficient Time To Fill First Half Of Memory Before Trigger Is Allow Sufficient Time To Fill First Half Of Memory Before Trigger Is
Received.
Received.
END END
Press the Mode Sel button as many times as needed to illuminate the LED above Press the Mode Sel button as many times as needed to illuminate the LED above
End. To begin recording first press the Ready button and then the Record button.
End. To begin recording first press the Ready button and then the Record button.
The processor will record images until you press the Record button again, or a trigger
The processor will record images until you press the Record button again, or a trigger
signal is received through Trigger In or Trigger SW In. The processor stops recording
signal is received through Trigger In or Trigger SW In. The processor stops recording
the instant the trigger signal is received. The video stored in memory will contain
the instant the trigger signal is received. The video stored in memory will contain
images covering events up to the time when the trigger signal was received.
images covering events up to the time when the trigger signal was received.
END MODE FRAME NUMBERING END MODE FRAME NUMBERING
NOTE NOTE
Allow Sufficient Time To Fill Memory Before Trigger Is Received. Allow Sufficient Time To Fill Memory Before Trigger Is Received.
3-7 3-7
Memory / Frames First Frame Trigger Point Last Frame
512 megabytes / 8192 -8,192 1 1
1 gigabyte / 16384 -16,383 1 1
1.5 gigabytes / 24576 -24,575 1 1
Memory / Frames First Frame Trigger Point Last Frame
512 megabytes / 8192 -4,096 1 4,096
1 gigabyte / 16384 -8,192 1 8,192
1.5 gigabytes / 24576 -12,288 1 12,288