Photron FASTCAM ultima 1024, Руководство пользователя

Страница: 29 / 90

3-5 3-5
S T S T AR ART M O D E T M O D E
Press the MODE SELECT button several times until the START LED lights up. Press the READY Press the MODE SELECT button several times until the START LED lights up. Press the READY
button to turn the system into READY mode. Then press the RECORD button to make a recording. The button to turn the system into READY mode. Then press the RECORD button to make a recording. The
system will continue to record images until the memory is full to the maximum number of frames it can system will continue to record images until the memory is full to the maximum number of frames it can
hold, and the system automatically stops recording. hold, and the system automatically stops recording.
The trigger signal input via TRIGGER IN or TRIGGER SW IN connector on the processor rear panel has The trigger signal input via TRIGGER IN or TRIGGER SW IN connector on the processor rear panel has
the same function as the RECORD button. When you wish to record images in START mode using an the same function as the RECORD button. When you wish to record images in START mode using an
external trigger, first press the START button and then the READY button as described in the above, then external trigger, first press the START button and then the READY button as described in the above, then
send a trigger signal to the TRIGGER IN or TRIGGER SW IN. Please note that TRIGGER IN requires send a trigger signal to the TRIGGER IN or TRIGGER SW IN. Please note that TRIGGER IN requires
a positive going TTL level signal of 10 milliamps and a contact switch of zero voltage (see 2-6). a positive going TTL level signal of 10 milliamps and a contact switch of zero voltage (see 2-6).
FRAME COUNT IN ST FRAME COUNT IN STAR ART MODE T MODE
Memory First Frame Trigger Point Last Frame
512 megabytes / 512 1 1 512
1 gigabyte / 1024 1 1 1024
1.5 gigabytes / 1536 1 1 1536
Recording Operation Recording Operation