Photron FASTCAM ultima 1024, Руководство пользователя

Страница: 36 / 90

3-12 3-12
ID ID
A two-digit number is displayed in the upper left corner of the monitor. This number can be used as an A two-digit number is displayed in the upper left corner of the monitor. This number can be used as an
ID of the recordings when you store them on tape. Any number can be set manually. The number ID of the recordings when you store them on tape. Any number can be set manually. The number
increments by one at ever press on the ID button. increments by one at ever press on the ID button.
T R I G P T T R I G P T.. ( T R I G G E R P O I N T ) ( T R I G G E R P O I N T )
At a press on the TRIG PT button, the playback jumps to the frame that was marked as the trigger At a press on the TRIG PT button, the playback jumps to the frame that was marked as the trigger
point in memory. The system displays the marked frame immediately and sets itself into PAUSE/ point in memory. The system displays the marked frame immediately and sets itself into PAUSE/
STOP mode. To exit the trigger point, press the P/S button. STOP mode. To exit the trigger point, press the P/S button.
This buttong also make the system memorize the current setting status. Press this button while the This buttong also make the system memorize the current setting status. Press this button while the
system is in Live mode, and the current settings are memorized. All the memorized settings are recalled system is in Live mode, and the current settings are memorized. All the memorized settings are recalled
when the system is turned on for the next recording session. when the system is turned on for the next recording session.
BL BL OCK (BL OCK (BL O C K P L A O C K P L AYB YBA AC K ) C K )
The BLOCK playback mode plays back a pre-selected portion of a recording in which you are interested. The BLOCK playback mode plays back a pre-selected portion of a recording in which you are interested.
Press the START button to mark a start frame during playback and then press the END button to mark Press the START button to mark a start frame during playback and then press the END button to mark
the end of a block of frames after the interesting scene has just passed. Press the BLOCK button to the end of a block of frames after the interesting scene has just passed. Press the BLOCK button to
playback the selected portion of the recording, repeatedly. All the playback controls work in this mode. playback the selected portion of the recording, repeatedly. All the playback controls work in this mode.
Display Mode Display Mode