Photron FASTCAM SA7, Руководство по оборудованию

Страница: 50 / 87

Chapter. 3 Recording
36
3.12.3. Synchronizing Multiple FASTCAM SA8 Systems(Multiple Unit
Synchronized Recording)
The system can perform synchronized recording by synchronizing multiple units using external.
Synchronization input/output
Synchronized recording settings using the system are made with PFV. The conceptual settings
when performing synchronized recording using two systems are explained here. First, decide which
camera to make the master camera (outputs the synchronization signal) and the slave camera
(receives the synchronization signal) from the two systems to use for synchronized recording.
Setting the Master Camera (Outputs Synchronization)
Set the signal output for the master camera which will output the synchronization signal. Synchronization
signal settings are made with PFV.

For PFV (Standard)
1. Verify that the camera mode is in LIVE mode (the image displayed is passed through from the
camera). If the system is in a mode other than LIVE mode, check "Live" on the camera
control panel.
2. Select I/O on the left tree from "Camera Option" on the camera control panel.
3. Set "GENERAL OUT1".

For the LCD Remote Controller (Optional)
1. Press the LCD remote controller's MENU key and the menu list is displayed.
2. Select GENERAL OUT1 from the SYNC IN/OUT submenu with the LCD remote controller's
ARROW keys and press the ENTER key.
3.
From the menu, select the signal to output from the master camera’s GENERAL OUT1
connector. Move the cursor to the SYNC POS item with the ARROW keys and press the
ENTER key to select.
4. The master camera is set to output a positive polarity vertical synchronization signal from its
GENERAL OUT1 connector.
SYNC OUT
SYNC IN
(MASTER)
(SLAVE)
CAMERA No.1
(BNC Cable)
CAMERA No.2