Photron FASTCAM SA7, Руководство по оборудованию

Страница: 29 / 87

15 FASTCAM SA8 Hardware Manual
2.2.8. Power Supply Connector
This connector is the connector to input the DC power supply. Connect the supplied AC / DC
Adaptor. A cable connector is available as an option. When using other power supplies, construct a
cable using the pin diagram below for reference.
DC 22-32V 65VA Pin
Diagram
ECJ.2B.304.CLD(LEMO)
Connector Name Signal Name
Pin
No.
Camera body connector
type name
(Manufacturer)
Cable connector
type name
(Manufacturer)
DC 22-32V 65VA
+22V
～
+32V IN
1
ECJ.2B.304.CLD
(LEMO)
FGJ.2B.304.CLLD52Z
(LEMO)
GND 2
GND 3
+22V
～
+32V IN
4
When using the connector pins directly, refer to the chart above and ensure the wiring
is correct.
If the wiring is incorrect, not only is there the danger of the system malfunctioning, but
also of fire and electric shock.
Do not use a power supply which does not meet the system's specifications, or a
power supply you cannot guarantee the safety of.
By using a power supply outside of the system specifications, not only is there the
danger of the system malfunctioning, but also of fire and electric shock.
Please use a external power supply with the suitable rating which was estimated by
IEC/EN 61010-1 3
rd
Edition (compiled with CI. 6.3 and CI. 2.5), and separated from the
main circuit by double insulation or reinforced insulation
Warning
Warning
Warning