FASTCAM SA-X2
40
1.4 Device Connections
1.4.3
Connecting a Video Monitor
Connecting video monitors to the system for checking the live image (camera pass-through
image).
Connect a video input connector on a video monitor to the “VIDEO OUT” connector or the “HD SDI”
connector with a BNC cable according to the type of video signal to display.
Connectors that output the signals are selectable from the PFV software or the optional remote
keypad.
NTSC
1080i
60Hz, 59.94Hz
1080p
30Hz, 29.97Hz, 24Hz, 23.98Hz, 24Hz(sF), 23.98Hz(sF)
PAL
1080i
50Hz
1080p
25Hz, 24Hz, 23.98Hz, 24Hz(sF), 23.98Hz(sF)
• Since the output of composite video/HD SDI is exclusive, color bars are displayed on the output not
selected. (Color bars are a reference guide).
• One of the connectors can switch the output signal between Live mode and Memory mode, and the
other connector will always output Live signal simultaneously.
• Use 5C-FB specification cables for HD SDI output
2x HD SDI connector (BNC)
The HD SDI (High Definition Serial
Digital Interface) output.
2x VIDEO OUT connector (BNC)
The composite video (NTSC/PAL)
output.
Video Monitor, etc., Video Device
VCR, etc., Video Device
Содержание FASTCAM SA-X2
