Photron FASTCAM SA-X2, Руководство по оборудованию

Страница: 8 / 74

FASTCAM SA-X2 8
Using the System Safely and Correctly
■Always unplug the system when cleaning it or when it is unused for a long period of time.
Leaving or storing the system connected to the power source might cause fire from
insulation deterioration or electrical discharge.
■Please consult us in advance when you perform an event by which laser light or direct rays
fall on the image sensor surface.
■Do not set the system in a location where the temperature gets unusually hot.
The trunk and inside of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or cause a fire.
■Do not place the system in a location prone to oily smoke or steam, or in a location with a
lot of humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.
■Ambient temperature 0-45°C, humidity 80% RH or lower, maximum altitude 2,000m or
lower. In addition, if exceeding these limits, use in a condensation-free environment.
Use in a condition out of the above limits can cause malfunction.
■Do not store the equipment in a location where the temperature goes below -20°C or higher
than 60°C. Also, prevent condensation from forming during shipment.
■When shipping, remove the connecting cable and use the original packaging or a dedicated
carrying case.
Do not ship the equipment in an environment where the temperature goes below -20°C or
higher than 60°C. Also, prevent condensation from forming during shipment.
■The rubber foot used in this product might be hydrolyzed if it is stored or used in a high
humidity environment for a long time.
Moreover, it might be hot melted if it is stored or used in a high temperature environment
for a long time.
&DXWLRQ