Photron FASTCAM Multi, Руководство по оборудованию

Страница: 19 / 81

5 FASTCAM Multi Hardware Manual
2.2. Accessories/Options
This camera system is used in conjunction with various accessories and optional items as
necessary.
Accessories and optional items available as of March 2016, are shown in the following
subsections:
2.2.1. Camera Head
FASTCAM Multi Camera Head HS-01 type 750K-M (Monochrome) (102479)
FASTCAM Multi Camera Head HS-01 type 750K-C (Color) (102480)
FASTCAM Multi Camera Head HS-01 type 200K-M (Monochrome) (102829)
FASTCAM Multi Camera Head HS-01 type 200K-C (Color) (102830)
The camera head incorporates an area sensor with the full resolution of 1280 x 1024 pixels,
maximum frame rate of 4,800 fps (at full frame recording), up to 750,000 fps (at segmented frame
recording, at type 750K). Regarding type 200K, its maximum frame rate is 200,000fps.

Refer to “FASTCAM Multi Camera Head HS-01 Hardware Manual”.

Export-controlled model type 200K is subject to restriction on the frame rate and shutter speed.

Subject to restrictions under Export Trade Control Order, your camera may NOT be used
depending on the country where you intend to use. If you are considering using your camera
outside Japan, check with Photron first. Contact information is given in 7.1. Contact Information.
2.2.2. Camera Cable
FASTCAM Multi Camera Cable 5m (102481)
FASTCAM Multi Camera Cable 10m (102482)
FASTCAM Multi Camera Bulkhead Cable 5m
FASTCAM Multi Camera Bulkhead Cable 10m
They are cables to connect between the camera head and processor.
The Bulkhead Cable is an optional cable, which can segment the camera cable in the middle. It
can be attached to the special camera housing. The length can be extended to a maximum of 50 m
by combining it with the normal camera cable.