background image

9.

 

Technical parameters

Battery model

Power supply voltage

Sleep mode power consumption

Normal power consumption

Sending power consumption

Light consumption

Backlight consumption

Effective distance

Size

Automatic sleep

Lighting time

Backlight time

Working temperature

Protection degree

(AA) x 2Pcs

3.0V

<6uA

<6mA

<20mA

<15mA

<7mA

<8m

1min

30s

30s

-25℃~50℃

IP22

8.1 Standard (24H)

D/N Thr

D/N Thr

Sunset

Sunrise

Dusk to Dawn(D2D)

Light on
Light off

D/N Thr

D/N Thr

Sunset

Sunrise

8.

 

Work Mode

D/N Dly

D/N Thr

D/N Thr

Sunset

Sunrise

Light on

Light off

D/N Dly

 

Time1

 

Time2

 

Time3

 

Time4

 

Time5

 

D/N Thr

Time1

Time

2

Time5

Time3

T0T

Light on

Light off

D/N Thr

Sunset

Sunrise

D/N Dly

If "Time4" is set to "T0T" then the controller will 

determine Time4 based on Time5 and previous data on 

the time of sunrise

.

8.5 

Movement

 sense mode

For controllers with an 

movement

 sensing function, 

"DelayOff" and "Dim NP" are active in "Time3" and 

"Time4" periods.

The following table gives some example settings:

Num

1

2

3

4

5

6

7

8

9

10

11

12

Name

Time1

Dim1

Time2

Dim2

Time3

Dim3

Time4

Dim4

Time5

Dim5

DelayOff

NP Dim

Setting Data

1.0H

100%

2.0H

80%

3.0H

60%

T0T

40%

2.0H

100%

10s 

 

10%   

Using the settings above, the controller would work as 
follows:

1. After the sun sets, the load is powered at 100% for 

1 hour

2. The load is then lit at 80% for 2 hours
3. For 3 hours, the load is powered at 60% when 

movement is detected and at 6% (60% x 10%) when 
movement is not detected.

4. Until 2 hours before dawn (based on previous data), 

the load is powered at 40% when movement is 
detected and at 4% (40% x 10%) when movement is 
not detected. 

5. The load is powered at 100% for 2 hours until 

sunrise.

120x65x20

(L x W x H)

 92g
(Not including 
the battery)

Weight

Light On

For controllers with "Standard" settings, if "Time1" is set 
to "24H" or "7.0H" and sent

 to

 the controller 

successfully, the controller's load will be constantly on.

For further details, please refer to the controller's 
instruction manual.

8.2 Dusk to Dawn (D2D)

If "Time1" is set to "D2D", the controller works in dusk
to dawn mode. The load will turn on while the sun is
down, as determined by the solar panel voltage.

Note: if "Time1" is set to D2D mode then "Time4" 
cannot be set to T0T mode.

8.3 Five-stage night mode

Time 1-5 and Dim 1-5 can be set individually to give
variable load power throughout the night.

8.4 T0T mode (turn on before dawn)

Smart Remote Programmer LUX-PRG User Manual

Page 5 of 5

Содержание LUX-PRG







Отзывы: