22
Limited PowerLight
!
Warranty
Photogenic Professional Lighting warranties the “standard line” products
are free from defects in material and workmanship of the PL2 series of
PowerLights for a period of two years from date of purchase. At our
choice, we will repair or replace any PL2, Solair or Voltage Smart series
light that is deemed to be defective. This warranty does not cover
damages caused by shipping, product abuse or use other than the
intended photographic applications.
Any product modifications will render this warranty void. Use of
other manufacturer’s accessories, which restrict normal or intended
operation (especially venting airflow), may cause damage and will void
this warranty. Flash tubes are warranted under the above conditions
for one year from date of purchase. Modeling lamps are covered for
initial use failures only.
SERVICE
The photographer should not attempt to make internal repairs.
Consult a dealer for an authorized Photogenic Professional Lighting
service agent. This will provide you safety, insure proper operational
functions and provide continuation of your warranty.
The technicians find it helpful to have the complete unit to better
troubleshoot and evaluate any problems. This includes the light unit, the
power cord, the flash tube and the modeling lamp.
For replacing the flashtube or modeling lamp, follow the directions and
specifications given earlier in this manual in the setup section.
Before removing the old tubes
or installing new tubes,
always unplug
your PowerLight to discharge the stored energy. Wait approximately 30
seconds for the main capacitors to deplete any residual stored voltage.
Never place your fingers or any metal objects into the flash or modeling
sockets. Contact with high voltage may result.
