7
MU1002X
this output is controlled using the Control Room/Phones
control.
7. Control Room Outputs
These two 1/4” outputs feed the signal altered by the
Control Room/Phones level control on the face of the
mixer. This output has extensive use, as it can be used
to feed the signal from the mixer to an active monitor, for
the monitoring of the audio signal from within a booth, or,
alternatively, for the addition of external signal processing
devices or mixers, as well as acting as a “side fill” output,
supplying audio to indoor areas that the main speakers
do not reach.
8. Record Out
These outputs will accommodate typical RCA cables, able
to feed a stereo signal to a variety of recording devices.
Phonic’s unique mini stereo output has also been included
for the addition of recording devices such as MD players,
and even laptop computers.
9. 2T Return
These RCA inputs are used to connect the mixer with
external devices, such as tape or CD players, or even
laptop computers. Also included is Phonic’s mini-stereo
input, for connection to devices such as personal MD or
MP3 players – unique to Phonic’s compact mixers. The
destination of this input is determined by pushing one or
both of the 2T Return Routing Buttons.
Rear Panel
10. Foot Switch Jacks
8
9
10
13
12
11