Phonic CELEUS 400, Руководство пользователя

Страница: 7 / 32

3
CELEUS 600
English
MAKING CONNECTIONS
Front Panel
1. XLR Jacks
These jacks accept XLR inputs for balanced
signals. They can be used in conjunction
with microphones – such as professional
condenser, dynamic or ribbon microphones
– with standard XLR male connectors. With
low noise preamplifiers, these inputs serve for
crystal clear sound replication.
Note:
When using an unbalanced microphone, please
ensure phantom power is switched off. However,
when using condenser microphones the phantom
power should be activated.
2. Stereo Channel Inputs
The CELEUS 600 features 4 stereo input channels (channels
5 through to 12), the inputs of which differ slightly to the mono
channels. Each channel includes two ¼" TRS phone jacks ideal for
use with keyboards, drum machines and electric guitars.
If you wish to use a mono device on a stereo return input, simply
plug the device’s ¼” phone jack into the left (mono) stereo input
and leave the right input bare. The signal will be duplicated to the
right due to the miracle of 'jack normalizing'.
In addition to the ¼" TRS phone jacks, channels 5/6 and 7/8
include XLR inputs (as described in point 1 above). These can be
used instead of the stereo TRS input connectors.
3. Stereo AUX Return
The 1/4” TRS AUX Return inputs are for the return of audio to
the CELEUS mixer, processed by an external signal processor. If
really needed, they can also be used as additional inputs. The feed
from these inputs can be adjusted using the AUX Return controls
on the face of the mixer.
Rear Panel
4. Control Room Outputs
These two 1/4” phone jack outputs are fed from the Control Room
mix as controlled by the Control Room level control. This output
has extensive use, as it can be used to feed the signal from the
mixer to an active monitor, for the monitoring of the audio signal
from within a booth, among many other possible uses.
5. 2T Return (L and R)
These inputs accommodate RCA cables from such devices as
tape, CD and MP3 players. The line from this feed is directed to
the Tape In mix and controlled by the 2T / USB RTN level control.
6. Record Out (L and R)
As with the Tape In ports, these outputs will accommodate RCA
cables, able to be fed to a variety of recording devices. This may
include cassette recorders or even laptop computers. Phonic
suggests the use of a y-cable. These cables include two RCA
connectors on one end and a single 1/8" mini-stereo jack on the
other end.
7. AUX Sends
These 1/4" TS phone jack is the final output of the AUX SEND
1 and 2 send mixes, as controlled by the individual AUX 1 and 2
rotary controls found on each channel. These can be used to feed
any number of external signal processors. The signal can then be
returned to the CELEUS 600 through the AUX Returns.
8. Headphones Jack
This stereo output port is suited for use with headphones, allowing
monitoring of the mix. The audio level of this output is controlled
using the Phones/Control Room control on the front panel.
9. Foot Switch Jack
This port is for the inclusion of a non-latching foot switch, used to
remotely switch the built-in Digital Effect processor between the on
and standby modes.
1
2
3
1
2
3
4 8 9
5 7 6