Wireless setup for mobile telephones
Establishing a wireless connection between Bluetooth mobile
telephones and the HearIt All receiver
1. Enter the mobile telephone menu to allow the mobile telephone to
search for available Bluetooth devices.
2. Select the Bluetooth entry
“HearIt All”
.
3. Enter the pass code into the mobile telephone (8888). Select connect. A
short beep will be heard in the hearing aid or in the headphones.
4. Once the wireless connection is established, receiver indicator
R3
stops
blinking blue.
Setup
Setup
13
12
Wireless setup for televisions
Establishing a wireless connection between the HearIt All
charger and receiver
1. Turn on the transmitter by a single short push to transmitter button
T1
.
2. Place the transmitter in the charger and the receiver around the neck.
3. Turn on the television.
4. Turn on the receiver by pressing receiver button
R1
for up to five seconds.
5. If sound is not immediately available press the receiver button
R2+
(volume up) for 5 seconds.
6. Once the connection has been established the receiver indicator
R1
turns
white.
If the connection is lost due to battery out, out of range or power off, repeat
steps 5 and 6. The indicator
R7
blinks white if the transmitter is off or out of
range.
T1
R2
y
e x
y
R1
R1
2
1
3
4
5
6
R7
Please note:
Once a wireless connection between HearIt All and a Bluetooth unit
•
has been established the units will automatically connect when they are
within range of each other.
The receiver can connect with both a Bluetooth mobile telephone and the
•
charger at the same time. If one Bluetooth connection has already been
established the receiver indicator
R3
will not blink.
During telephone conversations, the receiver indicator
•
R1
will illuminate
blue indicating that the wireless connection is active.
R3
2
1
4
Содержание hearlt all
Страница 19: ...34 36 37...
Страница 20: ...38...