Adjusting volume
Press receiver button
1.
R2+
(volume up) or
R2-
(volume down) to set
comfortable listening level.
The receiver indicators
2.
R3
to
R7
illuminate depending on volume level.
Operation
Operation
21
20
R2+
R2-
2
1
Communication
Using HearIt All as a communicator
1. Remove the transmitter and receiver from the charger.
2. Place the receiver around your neck (see page15).
3. To turn the transmitter and receiver on make a single push to transmitter
button
T1
and hold down receiver button
R1
for five seconds.
4. Choose between omni-directional or directional microphone setting by
pushing transmitter button
T2
or
T3
(see below).
5. Hold the transmitter in your hand pointing towards the direction of the sound.
6. To turn the transmitter and receiver off, make a single push to transmitter
button
T1
and hold down receiver button
R1
.
Please note:
If no sound is audible, press button
•
R2+
(volume up) for 5 seconds to
activate the wireless connection.
Transmitter and receiver do not have to be in close proximity to the
•
charger when using HearIt All as a communicator.
When using HearIt All as a communicator, we recommend that you are
•
seated.
Microphone settings
omni-directional
directional
T3
T2
Please note:
The maximum volume level has been reached if all five receiver indicators
•
R3
to
R7
are illuminated. If the signal is still too weak adjust the volume on
your television or contact your hearing care professionel for adjustment of
the telecoil in the hearing aid.
The volume setting is constantly displayed on the receiver. This is to allow
•
others (i.e. a nurse) to see if the unit is on and working.
When using HearIt All with your television, we recommend that you are
•
seated.
Содержание hearlt all
Страница 19: ...34 36 37...
Страница 20: ...38...