Charging when travelling
1. Connect Y-cord to the power supply and ensure that the power supply is
correct connected to an active wall power outlet.
2. Connect the ends of the Y-cord to charging jack
T4
on transmitter and/or
charging jack
R11
on the receiver.
3. Receiver indicator
R5
and transmitter indicator
T1
will illuminate red while
charging.
4. Once charging is complete, receiver indicator
R5
and transmitter indicator
T1
will light green.
Operation
Operation
Listening to the television
Using HearIt All with your television
1. Place the receiver around neck (see page15).
2. Turn on the receiver by pressing receiver button
R1
for up to five seconds.
3. Place the transmitter firmly in the charger.
4. Turn on the transmitter by a single short push to transmitter button
T1
.
5. Transmitter indicators
T2
and
T3
will both illuminate white indicating
transmission.
6. Receiver indicator
R1
will illuminate white while listening to the television.
R1
T1
R1
T3
T2
2
4
3
6
5
19
18
-
+
T4
R11
3
4
2
1
*
Charged
Please note:
As the battery capacity of the receiver is larger than the battery capacity of
•
the transmitter it may take slightly longer to charge the receiver.
We recommend fully charging batteries before use, however, partly charging
•
the units does not inflict damage to them.
Please note:
If there is no sound press receiver button
•
R2+
(volume up) for 5
seconds to activate the wireless connection.
* Plugs vary from country to country
Содержание hearlt all
Страница 19: ...34 36 37...
Страница 20: ...38...