Phonetics Sensaphone 800 Скачать руководство пользователя

Страница: 135 / 136

Appendix F: Returning the Unit for Repair

In the event that the Model 800 does not function properly, we
suggest that you do the following:

1) Record your observations regarding the Model 800’s

malfunction.

2) Call the Technical Service Department at 610-558-2700 prior

to sending the unit to Sensaphone for repair.

If the unit must be sent to Sensaphone for Servicing, please do the
following:

1) Unplug the AC power supply from the wall outlet, remove the

batteries, and disconnect all sensors from the alert zones.

2) Carefully pack the unit to avoid damage in transit. Use the

original container (if available) or a sturdy shipping box.

You must include the following information to avoid
shipping delays:

a) Your name, address and telephone number.

b) A note explaining the problem.

4) Ship your package to the address below:

SERVICE DEPARTMENT

Phonetics, Inc.

901 Tryens Road

Aston, PA 19014

5) Ship prepaid and insured via UPS or US Mail to ensure a

traceable shipment with recourse for damage or replacement.

132

Содержание Sensaphone 800









































































































































Результаты поиска

Содержание Sensaphone 800

Отзывы:

Похожие инструкции для Sensaphone 800

Бренды по названию

Популярные бренды

Phonetics Sensaphone 800, Руководство пользователя

Результаты поиска

Содержание Sensaphone 800

Отзывы:

Похожие инструкции для Sensaphone 800

Бренды по названию

Популярные бренды