Instruction manual
- 8 -
PV-5D.2-2U
™
1. 230VAC INPUT JACK
IEC socket for connection to 230VAC mains supply with glass fuse.
2. LINE OUT (PRE-MASTER)
Balanced output (before EQ and master) LINE 0dB, audio signal expansion output for, e.g. Audio mixer, etc.
3. GROUND LIFT (SEPARATE PER OUTPUT)
Typical uses in mass ground loops, multi-grounded audio connections, especially when two so-called LINE-LINE
devices are coupled together with audio line.
4. LINE OUT (POST MASTER OUT)
Balanced linear (after EQ and master) output LINE 0 dB. Audio output for e.g. other power amplifiers: WM-200DT,
WM-400DT and WM-600DT or DIGIVOICE loudspeaker systems.
5. LINE IN (PRE MASTER)
Linear (before EQ and master) balanced input on jack socket (LINE level, +0 dB).
6. AUDIO INPUTS 1 to 4
On the rear panel are 4 x XLR audio input sockets. The inputs are ba2, -3, 1-shield (see drawing).
For each input, the input sensitivity (GAIN) on the rear panel can be adjusted. The channel volume is set on
the front panel with separate slide control and 2-point EQ.
ATTENTION:
All microphone inputs have a switchable phantom power + 24VDC (DIN/IEC standard).
If
unbalanced, dynamic microphones are connected to the audio inputs, a coupling capacitor must be inserted
or the phantom power switched off.
© Copyright 2019, Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
REAR SIDE / CONNECTIONS
1
7
9
6
10
3
2
5
8
4
