Instruction manual
- 6 -
PV-5D.2-2U
™
9. CONTROL LED OF MULTIPLICATOR SWITCHES (PARAMETRIC EQ)
LED lights up when multiplying the set frequency by factor x10.
10. CONTROL LED OF MULTIPLICATOR SWITCHES (PARAMETRIC EQ)
LED lights up when multiplying the set frequency by factor x1.
11. OPERATION DISPLAY
Lights up when the amplifier is switched on (POWER ON).
12. CONTROL LED‘s, LIMITER, SYSTEM OK
13. ON / OFF POWER WITH OPERATING DISPLAY
After pressing this switch, the device is ready for operation.
14. 2-BAND EQ
Separate LF and HF control of the individual MIC-LINE inputs.
15. LINE INPUT
Line input (0dB) with level shift control, LF and HF-EQ controls for e.g. CD player input, etc.
16. RECORD OUTPUT (recording output)
Unbalanced wired (0 dB), used to connect recording devices. The signal available for recording is the sum of
the microphone and sound carrier inputs before MASTER volume control.
If the PROTECT indicator lights up without an input signal, system vibration or other
interference may be present. Disconnect the load and reduce the gain to zero. If the LED
remains lit, the amplifier may need to be serviced.
15
1
2
5
3
4
17
16
12
11
13
14
10
9
8
7
6
18 19
20
© Copyright 2019, Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
FRONT SIDE
