Phoenix A10 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 15

Phoenix A10 Скачать руководство пользователя страница 15

15

Copyright © 2013 Alary Design / PhotoShip One LLC -

www.PhotoShipOne.com

Conclusion

We thank you for purchasing the Phoenix A10. The Phoenix A10 is the first in a line of leading-edge new
liquid-smooth brushless drive digitally stabilized gimbals. Reflecting the incredible video quality and
resolution of lighter, smaller new cameras such as a Canon or Nikon DSLR, the A10 brushless drive
gimbal is agile and multi-configurable.

Constructed of carbon fiber and aluminum, the Phoenix A10 Brushless Drive Gimbal is light and strong,
weighing in at an easy-to-maneuver 1360 grams (gimbal only).

This makes it the perfect stabilization

system for any camera up to five pounds in weight, such as the Canon 5D. The A10’s ultrasonic
AlexMOS brushless-motor drives give you absolutely silent and smooth operation, and run on 14 to 25
volts. Plus, its massive 25mm axles and bearings on all axis ensure that you get slop free, tight
operation.

And…talk about smooth.

The A10 effortlessly covers 3-axis pan, tilt and roll, with solid stabilization at

roll rates up to 140-degrees per second and stabilization resolution to 0.1 degrees.

A10 works with

DSLR cameras at focal lengths as long as 200mm for long range stability. Totally adjustable for camera
balance, the A10 gives you maximum comfort in operation and provides follow and lock stabilization
modes. A10 can be operated as handheld/shoulder rig modes or operated remotely by wireless RC
controls on RC helicopter/multirotor platforms. Oh, and one more thing: the A10 is totally compatible
with industry-standard 15mm rod accessories such as handles, monitor mounts, magic arms and more,

making it easily configurable to your existing platforms.

We will be adding more content to this user manual over time as we receive feedback from users.
Please check our website for user manual updates.

«
...
13
14
15

Содержание A10
















Отзывы:

Нет отзывов