Phoenix Mecano Dewert Okin AG 300, Руководство по установке

Страница: 7 / 35

SG(AG) 300 control unit Safety Notices
75082(-) 7
Using the drive systems in medical applications
This DewertOkin product is in compliance with the safety requirements found in IEC 60601-1/
EN60601-1.
We strongly recommend that the end product (including all its components) which you are
manufacturing for a medical application should also be in compliance with the safety require-
ments found in IEC 60601-1/EN 60601-1.
You should make sure that the mechanical movement of the motor in your end product poses
no risk of injury. Conduct a risk analysis for the end product for this purpose. You should also
include safety notices in the instructions for the end product and technical safeguards in your
product to eliminate any risk.
2.2 Selection and qualification of personnel
This SG(AG) 300 control unit should only be installed into the end product by someone who has
completed training in electronic motor assembly or has equivalent qualifications.
You should only install the SG(AG) 300 control unit when you are qualified to do so. Otherwise,
a properly qualified person should be found for this task.
2.3 Notice on safety during operations
Basic safety rules must be followed in order to ensure that the end product can be continually
operated in a safe manner. These rules must be observed while using the end product and
while installing the SG(AG) 300
control unit.
These rules and safety measures can be categorized as follows:
Construction measures before the installation (refer to page 17, section 6.1.2)
Safety fundamentals during the installation of the SG(AG) 300 control unit and during cable
and wire routing (refer to page 17, section 6.2.2)
Basic safety rules during operation (refer to page 25, section 7)
The creation of a manual for the end product which contains these and other safety rules.
2.3.1 Creating a user's manual
The manufacturer of the end product must create a manual for the users of that product. The
safety notices in the end-product manual must be written based on the end product's risk as-
sessment.
2.3.2 Electrical safety
WARNING
There is a danger of electric shock! Be sure to unplug the power cord on the
SG(AG) 300 control unit before you begin assembly!
The SG(AG) 300 control unit should not be opened! You must properly dispose of malfunction-
ing or broken units.