Phoenix Contact THERMOMARK ROLL 2.0 Скачать руководство пользователя страница 5

Страница: 5 / 54

For your safety

108716_en_01

PHOENIX CONTACT

5 / 52

For your safety

Read this user manual carefully and keep it for future reference.

1.1

Identification of warning notes

1.2

Qualification of users

This user manual is addressed to persons, who are familiar with the relevant safety con-

cepts for handling electrical machines. The persons must be able to recognize dangers.

This symbol indicates hazards that could lead to personal injury.

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not

avoided, it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided,

it could result in minor or moderate injury.

This symbol together with the

NOTE

signal word warns the reader of actions

that might cause property damage or a malfunction.

Here you will find additional information or detailed sources of information.

Содержание THERMOMARK ROLL 2.0























































Результаты поиска

Содержание THERMOMARK ROLL 2.0

Отзывы:

Бренды по названию

Популярные бренды

Phoenix Contact THERMOMARK ROLL 2.0, Руководство пользователя

Результаты поиска

Содержание THERMOMARK ROLL 2.0

Отзывы:

Бренды по названию

Популярные бренды