Phoenix Contact Nanoline NLC-035-024D-04I-02QRD-05A, Руководство пользователя

Страница: 99 / 134

2338_en_O PHOENIX CONTACT
95
Table B-5 Ethernet command Flags
Flag Name Description
F-136 ETH Set Read Only Mode On sets all data items to be read-only when
accessed through the Ethernet port
F-137 ETH Command 01 Reserved for future use
F-138 ETH Disable Port On disables the Ethernet port from remote
access from outside network sources
F-139 ETH Request DHCP On requests the Ethernet module to enter a
mode asking for IP Address from DHCP
server
F-140 ETH Request BOOTP On requests the Ethernet module to enter a
mode asking for an IP Address from a
BOOTP server
F-141 ETH Enable Web Access On allows the Ethernet module’s web
server to be accessed from a network
connection
F-142 ETH Reset to Factory Default On resets the Ethernet modules
configuration data to the factory default
settings. The IP Address is also reset to
0.0.0.0
F-143 ETH Command 07 Reserved for future use
F-144 ETH Command 08 Reserved for future use
F-145 ETH Request Boot On requests the Ethernet module to stop
communicating to the base to allow the
base module to enter boot loader mode.
F-146 ETH Request Reset On requests the Ethernet module to reset
itself to the stored settings
F-147 ETH Command 11 Reserved for future use
F-148 ETH Command 12 Reserved for future use
F-149 ETH Command 13 Reserved for future use
F-150 ETH Command 14 Reserved for future use
F-151 ETH Command 15 Reserved for future use