manualshive.com logo in svg

Phoenix Contact IOL MA8 PN DI8, Руководство пользователя

Поделиться
Скачать
Phoenix Contact IOL MA8 PN DI8 Скачать руководство пользователя страница 5

For your safety

4022_en_A

PHOENIX CONTACT

3

1

For  your  safety

Read this user manual carefully and keep it to hand for future reference.

The applicable specifications and safety directives (including the national safety directives), 

as well as the general technical regulations, must be observed during installation and 

operation. The technical data should be taken from the packaging instructions and the 

certificates (conformity assessment, other possible approvals).

The IP20 degree of protection (EN 60529) of the device is intended for a clean and dry 

environment.

Do not subject the device to any load that exceeds the prescribed limits.

The device is not designed for use in environments with danger of dust explosions.

1.1

Labeling of warning notes

1.2

Qualification of users

The use of products described in this user manual is oriented exclusively to:

–

Qualified electricians or persons instructed by them. The users must be familiar with the 

relevant safety concepts of automation technology as well as applicable standards and 

other regulations.

–

Qualified application programmers and software engineers. The users must be familiar 

with the relevant safety concepts of automation technology as well as applicable 

standards and other regulations.

This symbol indicates hazards that could lead to personal injury. 

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not 

avoided, it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not 

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided, 

it could result in minor or moderate injury.

This symbol together with the 

NOTE 

signal word alerts the reader to a situation 

which may cause damage or malfunction to the device, hardware/software, or 

surrounding property.

Find find additional information or detailed sources of information.

Содержание IOL MA8 PN DI8





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды