manualshive.com logo in svg

Phoenix Contact IOL MA8 PN DI8, Руководство пользователя

Поделиться
Скачать
Phoenix Contact IOL MA8 PN DI8 Скачать руководство пользователя страница 36

IOL MA8 PN DI8

34

PHOENIX CONTACT

4022_en_A

Data Storage Config 

Storage Contents

Indicates that the data storage for the port is empty or displays the Vendor ID and Product ID of 

the data stored on that port.

Automatic Data Storage 

Upload Enable

Default: 

Off

When this option is initially set to 

On

, the IOL MA8 PN DI8 saves the data storage parameters 

(if the data storage is empty) from the IO-Link device to the IOL MA8 PN DI8. 

Automatic upload occurs when the “Automatic Upload Enable” option is set to 

On

 and one of 

these conditions exists:

–

There is no upload data stored on the gateway and the IO-Link device is connected to the 

port.

–

The IO-Link device has the DS_upload bit on (generally because the configuration via 

Teach buttons or configuration page has changed).

When a port contains data storage for an IO-Link device and the attached device has a Vendor 

and Device ID that do not match, the IO-Link LED on the IOL MA8 PN DI8 flashes red to indicate 

a wrong device is attached. In addition, the “IO-Link Diagnostics” page displays 

DS: Wrong 

Sensor

 in the “IO-Link State” field.

Not all device parameters are sent to data storage; this is determined by the IO-Link device 

manufacturer.

Automatic Data Storage 

Download Enable

Default: 

Off

The data storage parameters on the IOL MA8 PN DI8 are downloaded to the connected IO-Link 

device if:

–

The “Automatic Download” option is enabled.

–

The data stored on the IOL MA8 PN DI8 port contains the same Vendor ID and Product ID 

as the IO-Link device connected to the port.

–

Data storage parameters are also downloaded to the IO-Link device if configuration 

changes are made on the device causing the DS_upload bit to turn on and automatic 

upload is not enabled.

–

The IO-Link device requests an upload and the “Automatic Upload Enable” option is set to 

Off

.

Disable the “Automatic Download” option because the IOL MA8 PN DI8 will reload the data 

storage on the port down to the IO-Link device, if configuration parameters on the IO-Link 

device have changed and parameters are desired to remain loaded on the IO-Link device. 

Data Storage Manual 

Ops

The “Manual Data Storage Ops” option provides the following functionality, if data storage is 

supported by the IO-Link device.

–

CLEAR: Clears any stored data for an IO-Link device on this port.

–

UPLOAD: Uploads and stores the IO-Link device configuration on the IOL MA8 PN DI8.

–

DOWNLOAD: Downloads the stored IO-Link device configuration from the IOL MA8 PN 

DI8 to the IO-Link device attached to this port, if the Vendor ID and Device ID match.

Table 5-5

“IO-Link Settings” page parameters [...]

Field name

Function

Do not enable 

Automatic Upload

 and 

Automatic Download

 at the same time. 

Содержание IOL MA8 PN DI8





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды